Weld On Jack Point - Electric Or Manual Jack - 1 Pack

Small, low profile weld on Jack Point mounts to your suspension or chassis and provides a mechanical connection between the Jack and vehicle, ensuring your car will never fall off the Jack. NOTE: Each Weld-on Jack points has extra material on the backside to allow you to sand away material to better contour the Weld-on Jack Point to the shape of the suspension or chassis component you are welding it to. Do the following to know how much material is available. 1. Place the Weld-on Jack point into your Jack. 2. Mark (with a sharpie) the Weld-on Jack point material that protrudes out beyond the face of the Jack. This is the material you have to work with when shaping the backside of the Weld-on Jack point to fit your component. And don't forget to allow an additional .125-.250" of distance in this area for your weld bead. If you have questions, please call or email before installing.

• Safest way to lift your vehicle with an AGM Jack.
• Weld it yourself kit mechanically lock your Jack to the car, so it cannot fall over.
• Extra material provided on the backside of the Lift Point. Sand to fit your application.